TLX-110S is a single 18-inch phase inverted subwoofer speaker, which provides a frequency range of 30-200Hz. It is designed to be used with full-range speaker TLX-110 or other full-range speakers. It can be used to expand the low-frequency response of the sound reinforcement system.
The subwoofer speaker TLX-110S uses a newly designed high-power woofer, which is completely free from the flow noise of an ordinary woofer when it is dynamic and adopts an inverted cabinet design. The design greatly enhances the output efficiency of the inverter, increases the output of ultra-low frequency band energy, and reduces the non-linear distortion of low frequency.
On both sides of the cabinet, there are four handles that are flush with the box and are installed on both sides of the box for easy transportation. Hanging parts are installed on both sides and the back of the box, and the speaker is designed with a three-point hanging mode to improve field installation efficiency and a more beautiful appearance. The pre-installed top support on the top of the box can be used with a supporting frame to connect to the TLX-110. The black perforated iron is covered with sound-transmitting cotton to prevent dust and water and protect the speaker unit.
| Technical specification： | |
| Power Handling(AES)： | 600W |
| Peak： | 2400W |
| Nominal Impedance： | 8Ω |
| Average Sensitivity(1w/1m)： | 93dB |
| Maximum SPL/1m： | 127dB |
| Frequency Response(±dB)： | 38Hz-250Hz(±3dB) |
| LF Driver： | 1 × 18″ driver |
| Physical data： | |
| Connector： | 2 × Speakon NL4 |
| Connect Method： | pin 1+/1-…full range,
pin 2+/2-…N/C |
| Cabinet Material： | birch plywood |
| Finish： | Black stonetex paint |
| Grille： | Steel mesh |
| Cabinet Size(W×H×D)： | 561×690×596mm |
| Shipping Carton Size (W×H×D)： | 652×790×680mm |
| Weight： | 47kg net/50kg gross |
Đánh giá
Chưa có đánh giá nào.