DC24 is a high-performance two-way passive point source speaker, which can provide a frequency range of 55-20KHz. It is designed for use in party KTV, small bar, and other places. It can be used with subwoofers to extend the low-frequency response of the system.
The DC24 speaker uses two high-power 12-inch woofers, two 12-inch drivers are mounted symmetrically on both sides of the box, and a 75mm voice coil 1.5-inch outlet compression tweeter is mounted on a large rotatable square horn, 12-inch The dipole arrangement of the cells can control directivity down to about 500 Hz in the same plane as the dipole. The specially designed port optimizes airflow noise at high dynamics and provides significant low-frequency reproduction.
The box is composed of 18mm plywood panels, and the surface is wear-resistant black plane waterproof two-split paint. Two built-in handles flush with the cabinet are installed on both sides of the speaker for easy transport. The top, bottom, and sides of the box are pre-installed with hanging screws, and the two parallel four-core NL-4 sockets on the rear wiring board are convenient for connection.
Feature:
75mm composite membrane compression treble
75mm high transient high power woofer
Rotatable constant-direction horn
Preset universal mounting point
| Technical specification | |
| Power Handling(AES)： | HF/LF: 80W/700W |
| Nominal Impedance： | 4Ω |
| Average Sensitivity(1w/1m)： | 97dB |
| Maximum SPL/1m： | 126dB(continuous)129dB(program)132dB(peak) |
| Frequency Response(±dB)： | 65Hz-18kHz(±3dB) 55Hz-20kHz(-10dB) |
| Nominal Directivity(-6dB)： | 80°(H) × 60°(V) |
| LF Driver： | 2 × 12” driver |
| HF Driver： | 1 × 75 core compression driver |
| Physical data | |
| Connectors： | 2 × 4-pin Speakon NL-4 |
| Connection way： | 1+1- Full /2+2- N/C |
| Material： | 18mm birch plywood |
| Finish： | black stonetex paint |
| Grille： | steel mesh |
| Cabinet Size(W×H×D)： | 800×398×450mm |
| N.W： | 40kg |
Đánh giá
Chưa có đánh giá nào.